PANINI ERROR CODES GUIDE
Error Code |
Description |
Action |
1 |
Device create failure |
|
2 |
Failure creating or resuming Bridge Tread during API starting-up or shutting-down |
|
3 |
Failure creating or resuming Polling Tread during API starting-up or shutting-down |
|
4 |
Failure Creating or Resuming Compression Thread during API starting-up or Shutting-down |
|
5 |
Generic OCR error |
|
6 |
The font is not available |
|
7 |
Buffers allocation failure |
|
8 |
No USB port available starting-up the API (StartUp() method) |
|
9 |
Error writing function call to Log file |
|
10 |
API method called with an invalid ID |
|
11 |
Invalid Device Object corresponding the ID supplied by the method |
|
12 |
Invalid parameter passed to API method |
|
13 |
Method cannot be called inside the current API state |
No documents or no patch. |
16 |
FPGA programming error |
|
17 |
E2PROM write error |
|
18 |
E2PROM read error |
|
19 |
Set time LEDs error |
|
20 |
Set gains error |
|
21 |
Set offsets error |
|
22 |
Error opening or closing serial port |
|
23 |
Send command through serial port |
|
24 |
Not available device enabled |
|
25 |
Failure Creating or Resuming Transfer thread during API starting-up or Shutting-down |
|
917504 |
No error |
|
917505 |
Unknown sorter error |
|
917506 |
USB error |
Bad USB cable / Port on local machine. |
917507 |
CRC error reading USB message from sorter |
|
917508 |
Wait feed done timeout |
|
917509 |
Wait last document pocketed timeout |
|
917510 |
Read sorter status failure |
|
917511 |
Sorter error pending: photocells calibration failure or jam document |
For: Photocell Calibration Failure, Jam Detected, Double Feed Detected or Doc Length Too Long. App should call GetSorterError to get more details. Also Check Endorsement may be activated with no message or customers endorsement is too long. |
917512 |
Communication failure reported by sorter |
|
917513 |
Feed failure |
When have no movement at all out of feeder |
917514 |
Full pocket |
|
917515 |
Safety: cover opened |
|
917516 |
Failure reading last document pocketed ID |
|
917517 |
Failure sending feed document command |
|
917518 |
Feeding command failure due to a document in the track |
|
917519 |
Set pocket command failure |
|
917520 |
Failure reading last document ID |
|
917521 |
Failure reading MICR waveform size |
|
917522 |
Failure reading MICR waveform chunk |
|
917523 |
Different returned MICR size |
|
917524 |
MICR buffer overflow |
|
917525 |
MICR reading failure |
|
917526 |
Not able to acquire Image |
|
917527 |
Error in Compression Thread |
Doc too dark or extremely skewed. Check ErrCropFront*.bmp or ErrCropRear*.bmp files. Black images possibly caused by MICR correction label or foil on doc, ground MICR head. |
917528 |
Read sorter error failure |
|
917529 |
Failure creating compensation tables |
|
917530 |
Failure decoding the ID Card |
|
917531 |
Application is enabling not available device |
Endorsements is too long or feature is enabled with no message, or ink cartridge is not installed. |
917532 |
Failure loading OCR engine |
Install the MVX demo to install the OCR Engine. also try reinstalling the CSM. |
917533 |
USB connection attempt timeout |
USB cable unplugged or USB driver not enabled |
917534 |
Feeder empty |
Only reported in hopper feed mode |
917535 |
Free track command is failed |
|
917536 |
Software overload |
PC resources not sufficient for total software load. |
917537 |
The device is in Standby status |
|
917538 |
The firmware is not compatible with |
MVX firmware version changed without unplugging USB cable or cold booting |
917539 |
Invalid SendPrinterData call |
Can be caused by calling SendPrinterData at wrong time in the doc cycle |
917540 |
The IDCard contain unsupported information |
Wrong patch or no patch. |
917541 |
Application is setting wrong device parameters |
The Thick Document setting is set too high, please change the registry to a lower number "9 to 13" |
917542 |
The feeder has reached the docs limitation |
An MVX with a 30 doc feeder has reached its limit |
917543 |
The device is waiting for feeder empty because docs limitation has been reached |
|
917544 |
The feeder is ready to work after limitation |
|
917545 |
Invalid DPM value |
|
917546 |
Image adjustment not calibrated |
|
917547 |
Error upgrading ID Card |
|
917548 |
Missing upgrade prerequisite |
|
917549 |
|
|
983040 |
No error |
|
983041 |
Invalid USB device name. Used inside SetDeviceName(...) |
|
983042 |
Error opening driver |
|
983043 |
Error closing driver |
|
983044 |
Get pipe info failure |
|
983045 |
Get device descriptor failure |
|
983046 |
Device I/O Control call failure |
|
983047 |
Write bulk pipe failure |
|
983048 |
Read bulk pipe failure |
|
983049 |
Write control failure |
|
983050 |
Read control failure |
|
983051 |
Get link state failure |
|
983052 |
Send link message failure |
|
983053 |
Receive link message |
|
983054 |
Program FPGA |
|
983055 |
Check FPGA programming done |
|
983056 |
Write E2PROM |
|
983057 |
Read E2PROM |
|
983058 |
Set time LEDs |
|
983059 |
Set gains |
|
983060 |
Set offsets |
|
983061 |
Write DMA bulk pipe failure |
|
983062 |
Read DMA bulk pipe - parameter |
|
983063 |
Read DMA bulk pipe - setup |
|
983064 |
Read DMA bulk pipe - phase 1 |
|
983065 |
Read DMA bulk pipe - phase 2 |
|
983066 |
Read DMA bulk pipe - clear |
|
983067 |
Read ID CARD EEPROM |
|
983068 |
Write ID CARD EEPROM |
|
983069 |
Set DPM |
|
983070 |
|
|